Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 91

Thread: Kitfox Factory Fly-in 2013

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    What date are you guys planning on being in Ogden for your overnighter?
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  2. #2
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    673

    Default Re: Kitfox Factory Fly-in 2013

    Quote Originally Posted by SkySteve View Post
    What date are you guys planning on being in Ogden for your overnighter?
    Steve, that would be Wed, Sept 11, weather willing.
    -- Paul S
    Model III SN910
    582 IVO Med

  3. #3
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    Well then ... You all have a place to stay, FREE. My plane lives at the Ogden airport. I would be happy to pick you all up and bring you to Wilson's Sky Ranch for the evening. I plan to leave early on the 12th so it's easy to take you all back to your planes. We have 2 empty bedrooms you are welcome to. Plenty of lush grass if you want to camp. Shower, whatever you need. Might even find a cold beer.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  4. #4
    Senior Member Av8r_Sed's Avatar
    Join Date
    Feb 2010
    Location
    10C Greenwood, IL
    Posts
    673

    Thumbs up Re: Kitfox Factory Fly-in 2013

    Wow, well there's an offer that would be hard to refuse. Should we put the Sky Ranch in the Foreflight comments for Ogden?
    -- Paul S
    Model III SN910
    582 IVO Med

  5. #5
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    The airstrip won't be completed until next year. This fall we are installing a new pressurized irrigation system so when that is done the irrigation ditch, bridge and holding pond will go away, then ... a new 750 ft airstrip. A new airsock is now in place!
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  6. #6
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Re: Kitfox Factory Fly-in 2013

    Sounds great Steve, I'll have to come up and check it out.
    Dan B
    Mesa, AZ

  7. #7
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default Re: Kitfox Factory Fly-in 2013

    Dan, yes by all means.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •