That’s exactly right, Eddie.
That’s exactly right, Eddie.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Lars Gleitsmann (Owner) (907) 229-6792 or Lars@betteraircraftfabric.com
Interesting.... Lars told me different and I never found that anywhere in the manual. I think this is his frustration. I was told if its touching it, glue it. Finishing tape is only for seams, rib stitching covering, and leading edge. To clarify he is not saying you don't need finishing tapes, but you don't use them the same way you do with the other fabric systems. There is not a need to cover all the fuselage tubes and ribs like you do with other fabrics. If you want to, you can, but its not needed.
Last edited by Shadowrider; 02-23-2019 at 09:36 PM.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Can anyone provide some close up images of their seams on the fuselage? And how you did the seam tapes? I'm currently debating if i do top/bottom then sides, or bottom-sides-top.
Doing the top last would make it easier to put in the static ports as I'm putting them near the tail, and leave ample time and room to complete wiring etc. However, I'm concerned about the looks of seams and tape.
912 IS
Airmaster Prop
Garmin Stack
C-FKLO