Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: boot cowl to windshield seal

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,156

    Default Re: boot cowl to windshield seal

    I think that looks pretty good, Ken. Your boat looks nice too, from what I can see of it!
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

  2. #2
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    715

    Default Re: boot cowl to windshield seal

    Nice job Ken, builders usually find out how well (or not) this area is sealed , the first time they park outside in the rain (as I did at OSH many years ago) I always carry a roll of electrical tape in my tool bag if i am going to be parked outside to cover the joint. Bruce N199CL

  3. #3
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: boot cowl to windshield seal

    John McBean said they were using the same stuff to attach the tanks to seal this area on the LSAs. That’s probably what I will do and finish it off with black caulk so the white doesn’t stick out on my black plane.
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •