I have a kitfox 5 vixen with smooth cowl. Will the rotax 914 turbo fit on the 912 engine mount and will the turbo clear the cowl? Any photos?
I have a kitfox 5 vixen with smooth cowl. Will the rotax 914 turbo fit on the 912 engine mount and will the turbo clear the cowl? Any photos?
Do you have a model 5 firewall forward or a model7?
Phil
I don't think the model 5 firewall forward setup would accept a 914 .
Kevin,
Kitfox Outback
912 ULS
Airmaster AP332CTFH-WWR70W
Summit Aircraft Wheel Skis
C-FOXW
I don't see why it wouldn't. A model 5 can take a 912 and the turbo is tucked in on the engine on the 914 and doesn't protrude away from the engine. Worst case, you may have to run a intake line to the air filter isn't sticking straight out the side. The 914 is a lot smaller than O-200s etc.
The person to ask would be John McBean.
There isnt much room in my Model 5 cowling with a 912 uls .
Doesn't the 914 reqire the rotax airbox?
Kevin,
Kitfox Outback
912 ULS
Airmaster AP332CTFH-WWR70W
Summit Aircraft Wheel Skis
C-FOXW
I haven't seen one with an air box. My intake filter goes directly on the turbo.