I am looking for any info to purchase a spinner to install on a jabiru 2200 using a sensenich two blade ground adjustable carbon fiber prop. I've seen some carbon fiber one's and wondering if anyone has also.
Thanks!
Dan
I am looking for any info to purchase a spinner to install on a jabiru 2200 using a sensenich two blade ground adjustable carbon fiber prop. I've seen some carbon fiber one's and wondering if anyone has also.
Thanks!
Dan
Dan G.
Model IV 1200 - Tri-gear
Jabiru 2200
Flying
i'm also looking for a spinner. I like the carbon fiber as well, but would consider any with correct size diameter. so far all I can find is the whirlwind which kitfox sells and im not sure but murle Williams may sell as well. I've seen it advertised as a blank or cut for a 3-blade. I think its about $335.
ken
I used a fiberglass UHS spinner. Carbon fiber would be nice. I had to cut the prop openings myself. It has worked well and wasn't too expensive. What diameter do you need? I can post or email some pics if needed.
Mike Bentley
Model IV-1200
Jabiru 2200A #438
Rotec Aerosport LCH Heads
Ellison EFS-2 Throttle Body
Prince Prop (64x34)
My SPOT Page
I would recommend the Whirlwind carbon spinner; kind of spendy but a very nice spinner that fits the SS7 cowl nicely.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
I think my required measurement is 13.3. I see the UHS offers 13.5" and says diameter may vary 1/8 to 1/2" larger. I like the price better but not sure if i want to risk the dimensions being that far off. Maybe they will customize.
I was able to hold tom wade's whirlwind spinner in my hands and it is light as feather, and very nice.