Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: Quarter Window

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 02-25-2024, 06:25 PM #1
    Delta Whisky
    Delta Whisky is offline
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    639

    Default Re: Quarter Window

    Will these help?
    Rear window dry fit outside.jpgRear window dry fit inside.jpg
    See my build log at:http://www.mykitlog.com/lowandslow/
    Reply With Quote Reply With Quote
  2. 02-28-2024, 08:10 AM #2
    Shadowrider
    Shadowrider is offline
    Senior Member
    Join Date
    Dec 2017
    Location
    Mapleton,UT
    Posts
    1,236

    Default Re: Quarter Window

    We just used 3m 2 sided tape and attached the windows after frames where covered with oratex. Clean look IMO. No issues with either plane.
    Dustin Dickerson

    Building 7ss STI x 2
    Oratex
    29" shock monster
    EP912STI 155hp
    Garmin
    N33TF......FLYING!
    N53TF......FLYING!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules