I'm installing the Advanced Aircraft Electronics VHF-5T comm antenna in my vertical stab, like I've seen some others do on the forum. The pictures I've seen has the antenna high in the VS so the cable connection will be sealed inside the tail. Unless they have installed an access panel, they wont be able to change the cable if there is a problem in the future. I was thinking of installing mine lower so the cable connection is in the area of the inspection panels at the vert/horz tail intersection. This does allow the lower part of the antenna to be near the elevator push/pull tube, the trim motor, and the rudder cables. If I secure this so it's clear of all that, does anyone see a problem with the location?

IMG_6074.jpgIMG_6073.jpgIMG_6078.jpg