Everything About Reaming

[jrevens]

Also, when you press the bearings into the freshly reamed location, you will be using Loctite Bearing Locker, which will seal the area from moisture and oxidation (corrosion).

Another thing to consider, at almost every location that you will ream something, there will be either Loctite Bearing Locker or some lubrication, both will protect against corrosion.

Ralph

Good points, Ralph... I wasn't even thinking about that. Jez - you definitely don't want any oil or grease on those surfaces that are going to receive bushings/bearings, before you apply Loctite.