Gap at the main gear attach fittings

[Dave S]

Agree with Jim 100%. At least on the old S7 build manuals I believe there there was a general instruction to seal up any unprotected voids with hysol.

[alexM]

^ What they said. It's in one of the very first chapters in the manual where it talks about inspecting your fuselage welds before you begin building.

[LetMeFly]

Agree with Jim 100%. At least on the old S7 build manuals I believe there there was a general instruction to seal up any unprotected voids with hysol.

Yeah, I remember that from the manual. Just went back to refresh my memory and that particular spot is called out! Duh! I'd found so many other spots I had to seal that I thought I'd found them all by now!

Thanks everyone.