torque for a 912 Uls ring mount bolt

[jrevens]

I'm not sure of the torque pressure for the Allen head screws, that connect the Ring mount to the engine.
The site at CPS were l bought the bolts had them at 30 lb. It seems light. The bolts are m10x35
Any ideas would be great.
Thanks

Flyby5,

30 ft.lbs. is called out in the specs that I have. That isn't light... as a matter of comparison, in the "standard" table for metric fastener sizes in the Rotax documents, the torque for a 10 mm bolt is listed as 26 ft.lbs. (312 in.lbs.).