Seriously inexpensive insurance.
Seriously inexpensive insurance.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy
As long as we are talking about insurance on your Glass Panel, I would highly recommend B&C's Advanced Voltage Control, the 'AVC1." Very impressive unit which is literally a plug and play replacement to the Ducati voltage regulator supplied by Rotax, which some people seem too have issues with. Usually due to voltage demands higher than 13.5 volts, and a poorly ventilated, high heat installation. I just happened to find them while speaking with their tech support about needing over-volatage protection, especially so with a glass panel so as not to toast my expensive critical components, Again cheap insurance for the big scheme of things. The AVC1 is purpose built for the Rotax.
The AVC1 was supposed to revealed this year at Oshkosh, but as we know this got cancelled. For me this is one of the most exciting support products for the Rotax which will give me the confidence my glass panel gets year's of service.
Give them a call and talk to TJ and he can verbally review its performance. Plenty of documentation too. You can bet I will be replacing my old school Ducati Reg for B&C's AVC1.
https://bandc.com/product/avc1-advan...stallation-kit
N928M
Mike
West Chicago, IL
Kitfox 5 Speedster, building
912ULS, Airmaster 332
I have the TCW on mine also. Works well. I use the sponsors here all the time and they all have great service.
Flying SS7, G3X, 912iS
https://mountainfoxbuild.wordpress.com/