Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Nosedragger to Taildragger

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator desertdave's Avatar
    Join Date
    Jun 2019
    Location
    Scottsdale AZ
    Posts
    312

    Default Re: Nosedragger to Taildragger

    Here is a side by side of the original rubber and the 21" Desser tires I installed today.
    For the guys who run these, what is the normal tire pressure you guys use. My flying is 50/50 pavement and dirt strips.

    IMG_5785.jpg
    Dave
    KitFox 6 Taildragger
    912 ULS
    Whirlwind 70” Prop
    Garmin G3x
    All around nice guy

  2. #2
    Senior Member PapuaPilot's Avatar
    Join Date
    Nov 2013
    Location
    Nampa, Idaho
    Posts
    1,229

    Default Re: Nosedragger to Taildragger

    Quote Originally Posted by desertdave View Post
    Here is a side by side of the original rubber and the 21" Desser tires I installed today.
    For the guys who run these, what is the normal tire pressure you guys use. My flying is 50/50 pavement and dirt strips.
    I have been running mine at 12-15 psi. I like the low end for dirt strips. Any lower than 12 psi and they tend to slip on the rim.
    Phil Nelson
    A&P-IA, Maintenance Instructor
    KF 5 Outback, Cont. IO-240
    Flying since 2016

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •