Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 10

Thread: Fabric cuts on the wing tank transition

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-03-2019, 09:43 PM #3
    Birdseyeview
    Birdseyeview is online now
    Senior Member Birdseyeview's Avatar
    Join Date
    Sep 2017
    Location
    Oregon, Ill
    Posts
    203

    Default Re: Fabric cuts on the wing tank transition

    Darrel, Thanks for your response and I'm impressed by your log entries. I figured out what to do to solve my issue and proceeded accordingly and it was successful. My first wing is covered and after the final shrink I'll move on to the other wing. BTW, did you shrink your fabric up to 350 or did you stop at 300?
    Last edited by Birdseyeview; 12-03-2019 at 11:04 PM.
    Larry Olson
    Kitfox Series 6 - 1st Flight Oct 2021
    Tri-gear, smooth cowl
    912 ULS
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules