Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: Needing Reinforcement tape

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member aviator79's Avatar
    Join Date
    Dec 2016
    Location
    Los Alamos, NM
    Posts
    913

    Default Re: Needing Reinforcement tape

    I haven't used cotton, but I recommend that you follow the Poly Fiber manual as closely as possible. I think the cotton tape is very thin, and doesn't have an adhesive back. There's a reason that two different products exist.

    You should need about 200 feet total. I'm not sure 1 roll will quite get you there.
    --Brian
    Flying - S7SS

  2. #2
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,972

    Default Re: Needing Reinforcement tape

    The one roll that came with the kit was a little short, but Debra was able to sell me a few extra feet.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •