Trim indicator (Dynon )

[N213RV]

http://www.vansairforce.com/communit...p?t-69494.html

Look at the above link. Looks like orange is power (5v from ems module), blue is ground and green is the sensor output.

I hope this helps!

[silvaleonardo]

http://www.vansairforce.com/communit...p?t-69494.html

Look at the above link. Looks like orange is power (5v from ems module), blue is ground and green is the sensor output.



I hope this helps!

Thanks MIke. ....this solves the trim indicator issue. Will get on it Asp.
Leonardo

[silvaleonardo]

I would like to thank everybody for the advice on this matter. Here is how I did it, works very good. (I changed de quick link for a new one.)
Thanks again.IMG-20160816-WA0002.jpg

IMG-20160816-WA0003.jpg