125 hp O200

[wapelhj]

Hi guys,

I can't take it anymore.

Lycon is one of the best engine shops there is. If they recommend it then take it to the bank and never look back.

If you want to get the most out of any engine you go there.

Jim

[jtpitkin06]

As is the case for any engine selection you get a choice of
Power
Longevity
Economy

...pick two.

[mtcicon]

At this point I'm gonna go with a corvair. SPA in Florida is working on an installation package.

[oldfox]

Don't do it you will have a lot of problems I just took out a corvair engine and replaced it with a 0290 did it for a buddy of mine and he had a **** load of problems with it . I hope you like to working on your plane because that is what you are going to be doing. I know there are a lot of guys that will beat me down here but you have been warn. I would rebuild o200 only one guys opinion good luck

[Flybyjim]

If you are going to use a corvair engine, I will have one available shortly that is a William Wynn conversion with the 5th bearing, I am buying a plane -not kitfox- that is about 70% built and it comes with this engine. I did a auto conversion several years ago Geo with raven redrive, I'm not going that route again. I will put a rotax 100hp onto this plane. If your interested PM me.