Help ! Need Gear Puller for B Box (Drive Gear)

[Avmech]

Update: After hours of combing the web, I discovered this. LEAF used a tool in one of their videos that I noticed wasn't one of the Rotax produced tools. Apparently they do not produce their version anymore, however I was able to find this:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

almost identical to the tool used in the video (correct thread and pitch size). I would just need a small metal button to use as a pressure point on the end of the shaft and to cover the bolt hole.

Hope this will fill in the gaps for any other newbies just getting into the older kitfox/rotax world like me.

I will report back with success or failures

Avmech
(B757Rus)