Hi All,

Getting ready to replace the windshield and doors - and trying to decide between Lexan vs Acrylic/Plexiglass.

I've been reading through the archives here and at Avidfox - and there are good arguments for both.

Seems like most posts have been on use of Lexan, but a few mention Lexan's sensitivity to gas, UV, and crazing around bends and so strongly recommend acrylic.

The price here is almost the same 4'x8'x1/16th" sheet of Lexan ~$62 and $75 for Plexi - so pretty much a wash there.

Downsides on acrylic I've read are propensity to crack when drilled or bent, easier to scratch but much easier to buff.

The plane sits outside with a cover.

So any suggestions? Which way should I go? Do I heat at the plastic for the forward spar bend?

Cheers,

Owen