Verbiage for Annual Condition Inspection

[LSaupe]

What are you guys using for the verbiage on your annual condition inspection sign off? Are you signing off a separate one for the airframe and engine?

EAA shows a general guideline, but as Part 43 doesn't apply to EAB, it seems some modification is required in the statement. Or does Kitfox have a boilerplate statement that should be used here?

https://www.eaa.org/en/eaa/aviation-...ion-inspection

Many thanks,

Larry

[ppilotmike]

I basically use what the EAA has with a couple modifications. I certify I have inspected this aircraft in accordance with an annual condition inspection per FAR part 43 app D and found it to be in airworthy/unairworthy condition. Signature, total time, and date. If it is unairworthy I am required to give a list to the owner of the items that make it unairworthy. The owner must then repair those items and include documentation and his signature and this makes it airworthy. Keeping these records is all that is required by the FAA and when repeated they can be discarded. Mike

[jrevens]

Hi Larry,

I have a separate Engine Log Book where I document the details of any work done on the engine, as well as oil and filter changes, compression tests, etc. The Airframe Logbook is where I document my annual condition inspections. The airworthiness of the machine includes the engine, of course, so the annual inspection includes the engine. Any changes, maintenance, repairs or tests I've done specifically to the engine I detail in the Engine Log Book. I only make one entry for the Annual Condition Inspection - in the Airframe Logbook, and I use the following wording -

"I certify that this aircraft has been inspected in accordance with the scope and detail of Appendix D of FAR Part 43, and found to be in safe operating condition." Then I sign my name and my Repairman's Certificate number. Actually, every entry that I make in the Log ends with my signature and number.

I did it for the 27th time on my T-18 this year.

You also want to remember to test your ELT every year, and document that. I have an older unit in the Thorp, and the wording I use for that is-

"ELT tested in accordance with 91.207 (d) (1 through 4), and has passed all tests."

I don't know yet if that's still the proper verbiage for the newer ELTs like I have in the Kitfox.

[LSaupe]

Thanks guys.

[PapuaPilot]

I do mine very similar to John's stating, "I certify that this aircraft has been inspected in accordance with the scope and detail of FAR Part 43, Appendix D and was found to be in a condition for safe operation."

I do a separate entry for the airframe and engine.

I would not use the wording that Mike suggests, we cannot use the word "airworthy" in reference to an experimental plane. They are never airworthy according to the FAA's definition found in FAR 3.5:
"Airworthy means the aircraft conforms to its type design and is in a condition for safe operation."
EA-B aircraft do not have a FAA approved type certificate data sheet (type design) to conform to. EA-Bs can only be found in a condition for safe operation, thus the reason the inspection is called a condition inspection.

[efwd]

I'm learning something here Phil. What is it that you get from the FSDO that you must have on board the aircraft when it fly's? I always thought it was an Airworthy certificate?

[PapuaPilot]

Great question, I thought someone was going to bring this up.
Yes, we need to have form 8130-7, which is a Special Airworthiness Certificate, before we can operate our EA-B aircraft.

Here is what FAA.gov says about this document:
"The FAA special airworthiness certificate (FAA Form 8130-7) is an FAA authorization to OPERATE an aircraft in the US airspace . . ."

"A special airworthiness certificate in the experimental category is issued to OPERATE an aircraft that:
- Does not have a type certificate (true for EA-Bs) or does not conform to its type certificate (this only applies to certified aircraft)
- AND is in a condition for safe operation (true for any type aircraft)"

"Additionally, this certificate is issued to OPERATE a primary category kit-built aircraft that was assembled without the supervision and quality control of the production certificate holder."

A Special Airworthiness Certificate does not make or deem an aircraft airworthy. Its purpose to to authorize us to operate the aircraft.