Thanks for the kind words and, good luck on your project.
Thanks for the kind words and, good luck on your project.
Kitfox SS, 912 ULS
http://tropicaltuba.com/Kitfox%20Project/Kitfox.htm
Here is what I did. Used a 4-40 rod and Clovis from the hobby shop:
-Mike Kraus
RV-4 built and sold :-(
RV-10 built and flying
KitFox SS7 built and flying and now on amphib floats!
And another picture
-Mike Kraus
RV-4 built and sold :-(
RV-10 built and flying
KitFox SS7 built and flying and now on amphib floats!
And another view:
-Mike Kraus
RV-4 built and sold :-(
RV-10 built and flying
KitFox SS7 built and flying and now on amphib floats!
I have the Skyview system. I used the same on my RV-10. I'll check the wiring tomorrow.
-Mike Kraus
RV-4 built and sold :-(
RV-10 built and flying
KitFox SS7 built and flying and now on amphib floats!
OK, thanks again.
Of what I understand is that the sensor has to connect to the EMS module and only has one wire for this purpose, the sensor has 3 (orange, green and blue ), my guess is the green one. Just want to be sure on this before I continue. Now I know the Ray Allen sensor can be used with the Skyview.
Leonardo