-
Senior Member
Pitot Tube Install Model III
Looking for some feedback on where you guys are running your Pitot tubes (in relation to the wing) and also if you are using any sort of static ports.
I have the stock Kitfox III location (where it exits the bottom of the wing anyway), the tube sensing opening is about 1" aft of the leading edge and about 4" below the wing.
I am also not running a static port, just an orificed plastic plug in the back of the instrument.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules