Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 13

Thread: SS7 and Rotax 912 ULS Temperatures

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-11-2015, 05:15 PM #1
    Jch
    Jch is offline
    Jch's Avatar
    Join Date
    Nov 2011
    Location
    Bellefontaine, Ohio
    Posts
    105

    Default SS7 and Rotax 912 ULS Temperatures

    The outside temperate was about 45 degrees here in Ohio today and I was about 3000ft msl. I have never flown in another Kitfox and have nothing to compare to so I thought I would ask you guys to take a look and tell me if Oil/Cyl/EGT/CHT temps (and anything else you might notice) looks normal. Not exactly sure why Cyls 1 and 2 have lower EGTs than 3 and 4 since carbs feed 1/3 and 2/4. Is there a need to adjust anything and if so what would you adjust to get EGT temps on 1/2 closer to 3/4. I have 113hrs on the new 912 ULS. Cyl temp probes on 1/4 (I think)
    Attached Images Attached Images
    Flying SS7
    Rotax 912 ULS
    Whirlwind 3-Blade
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules