-
Senior Member
Re: Canadian builder
I called and asked. I was told by the MD-RA to NOT permenantly bond it until the wing is inspected as they want to so see the spar all the way around.
-
Re: Canadian builder
Good to know
-
Re: Canadian builder
Best to ask your MDRA inspector.......
the dumb thing is that if you bought a plane from USA with 100 hours in logbook then they do not inspect inside the wing.
It would not be too nice if they wanted to see after the LE had been installed.
It will vary from inspector to inspector I have found
Good Luck - 32 C in the wind here now brrrrrrrrrrr -21C just outside
-
Senior Member
Re: Canadian builder
Must be really cold there with the humidity from the lakes. Being from Sarnia, I know that -25 in SWO is like -40 in Alberta
-
-
Senior Member
Re: Canadian builder
JF, I don't think an MDRA would give you a hard time since you can see in the inside. I had called and showed the instructions and they told me what they thought but that was just one guys opinion. I wouldn't sweat it. Glad to hear your project is moving
-
Re: Canadian builder
I dont think to Josh...my friend martin build a rv-7 and i make an inpection with md-ra...i said it's not very stresful...i dont check every rivet whit a gage..i just look every of them..so ...we gone a wait to seen what happened...and soon ll'e posted some new pic of project...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules