Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: I bought a "barn find" model IV

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-07-2013, 07:19 PM #1
    beeryboats
    beeryboats is offline
    Senior Member
    Join Date
    Oct 2013
    Location
    Brownsburg, IN
    Posts
    544

    Default I bought a "barn find" model IV

    Besides sending the Rotax 2 stroke out for O/H, what else should I take a second look at? Not much in the way of inspection plates in the fabric that I can see. But the covering does look and feel good and I see no other issues that I wouldn't expect so see after sitting for so long. I'm new to the Kitfox, but what I've seen so far looks pretty darn good. I need to know if there are any of those "special" spots that need to be inspected before I hand over a check.
    Thanks,
    Jay
    Last edited by beeryboats; 10-07-2013 at 07:24 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules