-
Senior Member
MD-RA/Canadian builders
Hi guys, those of you that have built in Canada, do I need to get a preclose inspection of the front spar before I put the Composite leading edge over it? Any insight would be appreciated.
-
Re: MD-RA/Canadian builders
I would ask your MDRA inspector.
If just the leading edge I would say no but if you are going over top of the front spar where the ribs are attached it would be MDRA call.
Good Luck
-
Senior Member
Re: MD-RA/Canadian builders
Thanks Dave. I will give them a ring and see what they say. The leading edge may be the last thing I do before cover if that is the case.
-
Re: MD-RA/Canadian builders
call Doug Murray
lives in Cardston, Alberta...not sure of his phone number
he is an inspector and all around good guy.
-
Senior Member
Re: MD-RA/Canadian builders
Hey Wannafly, I found his email address online and fired him off a quick one. I'll let everyone know the answer. Thanks
-
Senior Member
Re: MD-RA/Canadian builders
Hey Wannafly, what brand is your orange paint?
-
Re: MD-RA/Canadian builders
No idea...I bought it like this
-
Re: MD-RA/Canadian builders
You could also try Jerry Mulder at (403)343-6924, Jerry is the MDRA inspector that did my import inspection when I brought my Kitfox in from the states, he also does pre-cover and final inspections of homebuilt aircraft.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules