Carb Spring brackets

[phintz]

Hello everyone, I am still looking for pictures for the carburetor spring bracket install. I have a series 6 and had to swap the manifolds and carbs, (side to side). IT looks like that might have changed with the series 7 and SS 7. So I'm looking for anyone with a series 4,5,or 6! Would anyone have pics for this? I would be extremely grateful!!!
My manual Pics are almost black and basically no help. A picture is still worth a 1000 words!


Thanks
Patrick Series 6 Builder

[War Eagle]

Here are a couple pics of the series 6 carb setup. Is this what you are looking for?

[phintz]

Here are a couple pics of the series 6 carb setup. Is this what you are looking for?

On my 6 I had to swap the manifold and carb from side to side to make room for the oil tank that sits in the center. Your kitfox is a 7 Correct?

hansedj pics matched what I have!

Thanks for helping though!
Patrick

[hansedj]

that's the only ones I could find, I won't be able to get to the hangar until next weekend. I will take pictures if you don't have anything by then.

[jiott]

I am confused. I don't remember the need for any brackets like this on my SS7.

Jim

[phintz]

I am confused. I don't remember the need for any brackets like this on my SS7.

Jim

yeah for some reason it changed going into the 7 and ss-7, I'm thinking since they moved the oil tank to the outside on yours they left the manifolds and carbs alone.

Patrick

[War Eagle]

On my 6 I had to swap the manifold and carb from side to side to make room for the oil tank that sits in the center. Your kitfox is a 7 Correct?

hansedj pics matched what I have!

Thanks for helping though!
Patrick

Yes my plane is a Series 7, but the pics I sent were from a series 6 plane.

[hansedj]

Here are the other pictures you wanted. hope this helps.

[hansedj]

Two pictures I Found from ours Dj

[phintz]

Two pictures I Found from ours Dj

yes!!! thats exactly it! Would you have a picture of the inboard side as well?

Thanks !

Patrick Series 6 builder