Baggage Floor Material

[Desertwndrr]

I got with a friend of mine in the carpet business about what would work well for the Kitfox baggage floor that would be lightweight. He suggested “wall carpet”. Basically it’s the same material that they use to cut noise reflections in theaters. Super light and easy to work with.

Very happy with the results!!

Basically I installed the baggage floor panels into the frame. Backdrilled the mounts. Removed the floor panels. Laid them down on the wall carpet and marked the layout that best matched the “grain” of the carpet. Flipped the panels over and sprayed the floor panels and the wall carpet outline with contact adhesive. Once dry I realigned the panels to the prior marks and mated them up. After trimming the excess I cut the middle edge between the two panels and now the carpet acts as a hinges for the two panels and they fold up for reinstallation. Last, I used a solder iron to clean up the backdrilled mount holes.

I then installed the floor panels in the extended baggage sack and pulled the sack tight to the floor panels. Used the same solder iron to burn the predrilled holes into the baggage sack so that the the bolts can run through the baggage sack to the airframe mounts.