Hi guys,
just started Phase 1 today - dragged it to the airport about a mile away with the tail wheel in my pickup truck bed. Got there and set up, taxied and tested for an hour. I noticed that some times it took extra power to get moving. Anyway I was towing it back home and noticed smoke coming out of my brake pads on the right wheel, so I stopped and let it cool down.
Upon examination I found that the shoes fit somewhat tight on the rotors (both wheels) although not causing undue binding.
However when the brake pedal is cocked at all into the braking position they bind firmly even with no other pressure applied to the pedal, but if you rotate the pedal away from compression the brakes seem ok.

So my question is has anyone else seen this problem and what did you do to resolve it?
Thanks in advance --- Karl Schuch