Hello,

I'm having some trouble deciding on how to cover my STi wing at the number 1 rib.

I see guys wrapping only to the number 1 sti rib and the original number 1 rib would be raw wood with varnish and paint. The kitfox factory plane has this.

My thought is to wrap all the way to the original number 1 root rib. I could make a slanted "tent" profile instead of the straight 90 degree "fence" profile. Then the wood would be covered and the fabric would be a bit stronger because it would wrap 180 degrees around the #1 rib capstrip.

I have attached a photo of the wing. Feel free to draw on how you would do the fabric. Also is a brief youtube clip.

https://youtu.be/Ss56XyoF1Yw

-Roger

PXL_20201215_121006057.jpgPXL_20201215_115624055.jpg