There is a relatively easy option for moving your kitfox if the distance to the airport is not too great and you only need to do it once - just hire a tow truck.
Knowing the 50 miles of highway was rather bumpy, I could not take any shortcuts in the bracing and preparation. I bought the "Transport Kit" from John McBean and it worked great. In particular, the tail pad was awesome at preventing vertical fin abrasion from the folded flapperons and also for keeping the rudder secure. Having seen lots of discussion on trailering threads about the top of the fuselage crumpling, I put an additional support under the tail and I was glad I did. Not sure if all kitfox models have this but my series 6 has a lift point on the bottom edge of the fuselage in line with the leading edge of the vertical fin which goes all the way thru the fuselage.
Because I scoured the forum here for weeks trying to figure out the best option for moving my kitfox, I thought I would assemble all the other options I considered.
Why not a car mover style between the wheels trailer?
With 8.5" wide tires, my Series 6 main gear is 88" wide as measured between the outside of the tires. The maximum width allowed on freeways is 102" so no highway legal car trailer would be wide enough for me. A between the wheels trailer *could* work but it would need to be custom built (as many here have done) so that the mains do not need to roll pass the trailer wheels (haul backwards).
Why not an "over the axle" or pintle trailer like Big Tex 100A-20?
That would have worked but then I would have had to rent a vehicle to pull the trailer too which would have cost more than the tow truck.
Why not a 24' flat bed truck?
I have done this before and would have done this again but none of the local rental places had these any more as they ended up selling them off because business stopped during COVID shutdowns. If you dont own a truck with a tow hitch, this is often the cheapest way to go for short haul. If the lift gate is long enough, you can roll the mains onto the platform and use that to get them up onto the platform, then use a cheap rolling shop crane to lift the tail up high enough that you can roll it fully onto the platform without scraping the bottom of the fuselage. If the lift gate is not long enough, you have to build a ramp and winch it up. Its a bit scary to do this, just make sure the ground is perfectly level and take it slow.
Why not a big enclosed moving truck?
Many moving trucks are 8' wide which would appear perfect for moving a kitfox safe and sound. The problem is that none I found had a door width is insufficient. I suppose if you got really creative you could put your plane in caddywhompus to get one wheel in, then use vehicle positioning wheel dolly to move the mains sideways and get the other wheel in you could do it but there would be a lot of opportunity for disaster. The only enclosed option for a Series 6 appears to be a custom enclosed car hauler by Blizzard or Arising.
Last edited by 3kdscf; 08-30-2020 at 08:44 AM.
Reason: added image
Easy short haul trailering option for Series 6
Reply With Quote
