-
Model IV Matco Brakes
Anyone happen to know what model Matco brakes these are? They are on a mid-90's Model IV, and can't see a p/n anywhere on them. I would like to replace the o-rings in them. Matco has most of their drawings online, and looks like Nitrile (Buna-N) 218 or 222 are pretty common on similar looking models.
IMG_0324.jpg
-
Re: Model IV Matco Brakes
This was from Matco. I have the same bake system.
I’ve updated some parts, thread below with pics.
They have excellent customer service.
https://teamkitfox.com/Forums/thread...earlier-models
The wheel was made by Kitfox and used out WHLB5 brake assembly and WHLD5S disc.
George R Happ
MATCO mfg
801-335-0582 801-335-0581 (F)
www.matcomfg.com
Technical Support Disclaimer: While we strive to ensure that the advice/information provided through our support is correct, MATCO mfg does not accept any responsibility for errors or omissions. Any advice or information that MATCO mfg gives you via any form of communication is not a guarantee that it will correct your problem. It is only offered as assistance to you. MATCO mfg will not be held responsible for any loss or damage as a result of our advice or information supplied.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules