I've run into another hardware issue. The jury strut clamps for the streamlined lift struts are pretty wonky. The front clamps are a bit long and will need to be shimmed with rubber. That is not a biggie.
The rear clamps however are too short. The provided bolts are not long enough to span the gap. I thought that it may be the masking tape but I even tried without it. I even tried to squeeze them closer with vice grips. I have temporarily solved the problem by salvaging longer bolts from elsewhere in the kit but I will need a more permanent solution.
Should I have kitfox send me longer bolts? Or just get new clamps all together?
I should say that if I do get longer bolts, I will need to space the gap in the clamp with washers.