912is EGT and Garmin

[efwd]

Hey Dustin. I have many of my Garmin boxes. Im not clear as to what it is your speaking of. My 912iS didn't have external sensors kit to my recollection. Can you describe what it is your looking for?

[Shadowrider]

Hey Dustin. I have many of my Garmin boxes. Im not clear as to what it is your speaking of. My 912iS didn't have external sensors kit to my recollection. Can you describe what it is your looking for?

Hi Eddie! Its the box that contains the Rotax 912 sensor kit. Because you have the 912IS you would of not gotten this kit. Joe if you bought the 912 rotax kit, I would send it back and just get the individual sensors you need because most of it you don't need.



Part# 11-09476
MFR Model# K00-00514-00ROTAX 912 Kit Contains:

• Manifold Pressure Transducer, Powered, 30 psi, Absolute, w/connector, Kavlico P4055-30A-E4A (p/n 494-30004-01)
• Fuel Pressure Transducer, Powered, 15 psi, Gage, w/connector, Kavlico P4055-15G-E4A (p/n 494-30004-03)
• Type K Thermocouple, 3/8-24 Bayonet, EGT, Alcor 86255 (p/n 494-70001-00)
• Shunt, Ammeter, +/-50mV, 100 amps, UMA 1C4 (p/n 909-D0000-00)

[JoeRuscito]

Thanks Dustin. Yup I think Ill send it back. So what does the CAN bus NOT provide? Just fuel flow and fuel pressure?
What pressure sensor does everyone use that attaches to the fine filter manifold?

Answer found: page 24-10 and 24-3 for anyone else interested