Thanks Guys. Don't ask me how I know but if you connect wrong you get a loud bang, smoke, and oil dripping out of the thing.
Thanks Guys. Don't ask me how I know but if you connect wrong you get a loud bang, smoke, and oil dripping out of the thing.
David E.
Woodstock, Georgia
N97DE S5 TD Flying
N97KE RV-9A Sold
N96KE RV10 Sold
Rans S21 Helping Brother Build (Selling)
Vans RV-14A (On Order)
Wired it up. Flipped switches. No pop, smoke, oil, or smell. Good to go!
David E.
Woodstock, Georgia
N97DE S5 TD Flying
N97KE RV-9A Sold
N96KE RV10 Sold
Rans S21 Helping Brother Build (Selling)
Vans RV-14A (On Order)
What are they used for on a Kitfox?
In our charging systems, the stator produces AC output which goes to the regulator/rectifier. The ouput of that is DC plus an AC voltage on top of it. A capacitor is often used to filter out higher frequency AC ripple on the rectified DC supply. It helps keep the electronics happy and audio quiet.
-- Paul S
Model III SN910
582 IVO Med
So how do you wire these things up, Do you run the hot wire to the positive side then continue from the positive side to the electronics buss? And ground side to ground, or does power go in one side and come out the other?