A bandsaw is handy, although not required. I have a cheap one, and it has been sufficient.

You can build wing rotisseries prior to the kit arriving. There are many ideas on the forums, the critical dimension is 27.5 inches between spar centers. I built a fancy fuselage rotisserie.... that didn't work. I then switched to a "tic tac toe" frame on the front, with the tail suspended from the ceiling by a bolt and fender washer in one of the rudder bosses. This worked well. Easy to rotate with one person. All of this is searchable on the forums to find more info.

Buy some extra clecos, and a bunch of cobalt #30 and #40 drill bits.