Help needed with new Warp drive on my 582

[avidflyer]

Not the one you are asking, but I've made a tool that clamps on the blade, and it has a laser attached to it. The laser will project a light across the hangar however far away the wall is. Mark that spot, and if the laser hits in the exact same spot on the second blade, you are as close as you can get. JImChuk

[beeryboats]

Not the one you are asking, but I've made a tool that clamps on the blade, and it has a laser attached to it. The laser will project a light across the hangar however far away the wall is. Mark that spot, and if the laser hits in the exact same spot on the second blade, you are as close as you can get. JImChuk

I saw that post in my search on this subject. Very good idea if the laser is bright enough.