It is unclear to me whether you bond the covering to the false ribs. Any input would be helpful. SS7 build.
Thanks
tom
It is unclear to me whether you bond the covering to the false ribs. Any input would be helpful. SS7 build.
Thanks
tom
The only bonding that occurs is when you are all done covering and shrinking and stitching the fabric, you apply the Polybrush to seal the fabric. The Polybrush soaks thru and bonds to whatever is underneath it.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
My thought is this - regardless what type of fabric system is used, it needs to be shrunk before any bonding of fabric to the false ribs, but then it is probably advantageous to "stick" it to them. It may make very little difference, and you have finish tape over the false ribs of course, but creating some slight bond between the ribs & fabric may minimize or prevent minor rubbing movement between them as the wings flex, preventing wear. With the Oratex, I applied a light coat of glue to the false ribs, but didn't apply pressure & direct heat to bond them until the fabric was shrunk.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime