Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 10

Thread: Smooth cowl, Rotax 912, IV-1200 fit..HELP!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2014, 07:56 PM #1
    GWright6970
    GWright6970 is offline
    Senior Member GWright6970's Avatar
    Join Date
    Jan 2011
    Location
    Vacaville, CA
    Posts
    359

    Default Smooth cowl, Rotax 912, IV-1200 fit..HELP!

    After exhausting all of my efforts, I can't get the top and bottom sections to be 5/8" from face of cowl to face of prop flange ON THE TOP AND THE BOTTOM to save me. (See photo) I have the aft end of the top of the bottom cowl at 17.5 inches up from the bottom longeron, etc...

    The cowl came from the factory two months ago, and was already pretty much trimmed.

    I even tried taking the aft end of the top cowl, and pulling it down 1.5 inches SUPER TIGHT over the sides aft end of the bottom, and even that extreme measure did not fix the angle.

    PLEASE.. what am I missing gents??!! Thanks!!!
    Attached Images Attached Images
    Grover Wright
    Flying a KF IV-1200
    ROTAX 912UL
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules