-
Kitfox tailwheel spring plate is broken
Hey there!
Im Marcel from Germany, we have a Kiitfox 2/3.
Last weekend we found a problem... the upper plate from the tailwheel spring is broken.
Anyone here Who had the same problem?
And know the best was to fix it ? Is it one plate above the tube or are there two plates from each side?
Best regards from germany bavaria!!!
20200301_144755.jpg20200301_144755.jpg
-
Re: Kitfox tailwheel spring plate is broken
This is a Model IV but I imagine they would be similar
Screen Shot 2020-03-02 at 9.34.33 AM.png
Seems the upper mount is welded to the frame, one piece
Note the chains are not attached in this picture as of yet,
-
Re: Kitfox tailwheel spring plate is broken
I had to fix one on a kitfox 1. I put another full sized piece under the original and welded it on where the original one cracked off. On the opposite side, bolt went thru both pieces. Be careful of protecting the fabric when you weld it. JImChuk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules