Thank's for the help with the seat problem issue. Now for my current problem i am installing my fuselage stringers and the flap horn on the control mixer drops below the belly stringer. If i attach that stringer to the strut carry thru tube as the plans say. If i move it forward to the rear landing gear tube & run it over the strut tube i'm fine. But will that create issues down the road also if i do that i should use stand off tubes as i pass the cross members aft i've included some pics. Which hopefully clarify the situation. #1 shows the stated attach point, #2 shows the clearance problem, #3 the fish mouth attach forward, #4 the crossover of the srtut tube, #5 the resulting abundant clearance, #6 what are those tabs for? Again thanks in advance for the help. By the way this is a mod 3 with 4 1200 mods.DSCF0145.jpg
DSCF0144.jpg
DSCF0140.jpg
DSCF0141.jpg
DSCF0142.jpg
DSCF0139.jpg