Thank you! Great info!
Thank you! Great info!
https://teamkitfox.com/Forums/thread...557#post102557
Another option.....Fiberglass. Worked well.
Thanks Jerry! Somehow I couldn't find this with a search. Exactly what I needed.
Recommendation: If I remember correctly, leave a bit if room between the #3 rib and the tank (for the rib stitch needle).
See my build log at:http://www.mykitlog.com/lowandslow/
It says to use structural adhesive between the tank and the rib. Is everyone drilling a little hole for the rib stitching?
Yup - filled the gap then drilled holes for the rib stitching.
Dave S
Kitfox 7 Trigear (Flying since 2009)
912ULS Warp Drive
St Paul, MN
Thanks Dave!