Any suggestions on what automotive hose to use to replace my oil lines?
Any suggestions on what automotive hose to use to replace my oil lines?
Pete
Leander, TX
Model III SN 1000
912
Grove
I guess I'll jump in, Pete. I believe that what I got from Kitfox is Aeroquip FC662. It's designed for "socketless" use. With the proper fittings you don't need any hose clamps. You can use it with standard barbed fittings & clamps also. It's a low pressure hydraulic hose that comes in different colors. Good for oil, fuel, etc. For 912's the -8 (1/2" ID) is used. A step up would possibly be FC332, which is rated for a little higher temperature and uses the AQP synthetic compound for the liner & jacket. I think it's a little stiffer also. You need hose designated as "hydraulic" & for use with oil. I hope that might help you.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Thanks John. I'll see if I can find some here in Austin.
Pete
Leander, TX
Model III SN 1000
912
Grove
I used Aeroquip hose from ACS.
I used Pro-Flex Hose from Jeggs, It matches the numbers I need for the Jabiru.