you might have to shim the sides , I think the Cessna steel spring gear is wider
you might have to shim the sides , I think the Cessna steel spring gear is wider
Chase
Model 5 OutBack
912 UL
I wondered about that. I also see that there is an adjustable pad as well. I may try and build one out of hardwood.
I use one of these, its a step/ jack point/ wheel chock all in one, hope it comes thru
Chase
Model 5 OutBack
912 UL
Think i got it this time
Chase
Model 5 OutBack
912 UL
Thanks, I saw that on an other posting. It looks great, I just don't have the metal tools or skills to weld something like that.
easiest thing to use if you have a good floor jack is a 2 x 6 or 4 x 4 .
between the gear and up against the axles -- if you just want one side jacked move the jack off centre a bit.
If you have cherry picker or overhead crane lift at engine mount next to firewall.
Cheers
If these were available, I would buy one.