-
Senior Member
Re: Removing the Model III Wheel and Tire Assy
-
Re: Removing the Model III Wheel and Tire Assy
simple operation. jack it
3 SHCS holding on rotor to wheel remove
dust cap
cotter pin
castle nut
slide off axle
I leave hub on to change tires but you are best to take to ATV shop or tire guy if you having trouble getting a wheel off -- Tire is challenging on beadlock style wheels
https://www.youtube.com/watch?v=l_ndpuhDqMg
Enjoy !!
-
Re: Removing the Model III Wheel and Tire Assy
FWIW, just did the same and went to the NANCO 21x12x8's and love them! Got the 16" tires off myself by breaking the bead in a large vice with a ratchet strap over the tire and under the jaw. A little muscle work, but very doable. Let the tire guys mount the new rubber and add new stems. This may go without saying, but of course you should clean inspect and repack your wheel bearings before reassembly.
Jay P
N627C
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules