Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: Cowl/Boot Cowl

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 10-08-2013, 11:29 AM #1
    Eric
    Eric is offline
    Join Date
    Mar 2009
    Location
    Boxmeer ,Netherlands
    Posts
    61

    Default Re: Cowl/Boot Cowl

    Hello

    The cowl of my KF 3 was repaired with polyester and some red resin
    I have all removed it with a heat gun because it didn"t stick very well.
    Now I have repaired it all with epoxy and that sticks very good.
    I had to make my cowl 4 cm longer to get my Rotax 912 nice under the cowl

    Eric
    Reply With Quote Reply With Quote
  2. 11-10-2013, 06:52 PM #2
    Micro Mong Bldr
    Micro Mong Bldr is offline
    Join Date
    Apr 2013
    Location
    Hillsboro, NH
    Posts
    95

    Default Re: Cowl/Boot Cowl

    Ended up repairing my boot cowl with pop rivets with large head & backup washers - seems to be working fine!

    Larry
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules