Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 40

Thread: kitfox classic 4 speedster tail problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 04-21-2013, 01:11 PM #1
    Geowitz
    Geowitz is offline
    Senior Member Geowitz's Avatar
    Join Date
    Mar 2010
    Location
    Middle North Carolina
    Posts
    456

    Default Re: kitfox classic 4 speedster tail problem

    LOL, Love the video...

    Don't have much more to add other than I agree it does appear that the bushings in your case are too short. Perhaps someone cut them off? They should stick out more. Not sure how you would fix that, but you definitely want a lot of the thread holding on all three points and the bushing as far out as possible for strength. Here is the best picture I could find which shows mine. Also a model IV Speedster. Looks like I have about 7/8 to an inch sticking out as TJ measured.
    Attached Images Attached Images
    Last edited by Geowitz; 04-21-2013 at 01:13 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules