I recommend to anyone reading this to not buy any sensors until after you have engine installed. You will then have a better understanding of what you need.
I recommend to anyone reading this to not buy any sensors until after you have engine installed. You will then have a better understanding of what you need.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
This is the only thing I have bought for my 912 iS. It is the UMA fuel pressure sender. All other parameters are provided through the ECU via the CAN bus, with both LANE A & LANE B having CAN H & CAN L, which are palled to then feed into whatever RDAC kit you are using for your particular EFIS set up. Fuel pressure is also fed to the RDAC.