Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: 912S Carb Problem

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-13-2014, 09:51 PM #5
    mcomeaux53
    mcomeaux53 is offline
    Join Date
    Jun 2014
    Location
    Sunriver
    Posts
    41

    Default Re: 912S Carb Problem

    I'm going spinner to rudder for sure"......



    Quote Originally Posted by Av8r3400 View Post
    Is it possible to post a photo of what you are seeing?

    This has been discussed on the Rotax forum and Rotax says to completely replace the carbs. Personally I think that is unnecessary. I believe that the galling can be cleaned up and the carbs rebuilt for use as long as the pistons slide freely.

    Remember the pistons have quite a bit of clearance in their bores, the seal is the rubber vacuum diaphragm on the top.
    Last edited by Av8r3400; 07-13-2014 at 10:56 PM. Reason: fixed quote
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules