Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 12

Thread: installed soft start today

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Sep 2018
    Location
    West Chicago, IL
    Posts
    21

    Default Re: installed soft start today

    Hello Patrick

    That is great news to hear, I am considering the same with LEAF. Most people I speak with about this say it is well worth the money and much easier vibration on the airframe/electronics
    Think the new conversion comes in around $2,400 with labor.

    My 2003, 912ULS and has the green stripe coils atop the engine, yet to be fired up for testing.

    Appreciate the commentary.

    Has anyone else installed the soft start conversion on their 912's? ... and to what level of success?
    N928M
    Mike
    West Chicago, IL
    Kitfox 5 Speedster, building
    912ULS, Airmaster 332

  2. #2
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,330

    Default Re: installed soft start today

    another alternative is to lower the base idle and start with the throttle pulled all the way back. once it starts you add throttle. cheaper than 2200 dollars in my book. no, you don't run it at low idle, you give it throttle to keep 2000 rpm. you could just put in a McFarlane throttle I suppose. Oh, it's important to choke it with mags off for about 6 seconds first.

    either way, you have to have a smooth start or you will take out the 1 way clutch, a real bummer.
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  3. #3
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: installed soft start today

    I put the bully-hawk in my 2003 912S after a few rough starts ( ~9 years ago), has been smooth starting ever since.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  4. #4
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: installed soft start today

    Does anybody know where to get one of the modules?

  5. #5
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: installed soft start today

    Perfect :-)

    PM sent !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •