Well... not necessarily easy, but simple! lol. It all depends on how patient you are with sanding, but it's definitely doable with some patience. Hell, I bet you could roll it on smooth enough and even without sanding it could look just fine.
Well... not necessarily easy, but simple! lol. It all depends on how patient you are with sanding, but it's definitely doable with some patience. Hell, I bet you could roll it on smooth enough and even without sanding it could look just fine.
Well I paint rentals, and I can roll out pretty good, with a good roller, and I have a power sander, so I was thinking, that would make it more simple.
Roger
In the last two years I've sprayed two planes with poly fibre system and it is real simple. Never spray painted anything before other than with a rattle can. Even used a pretty cheap spray gun from Harbor Freight. Built a spray booth that was about 11' wide X 22' long with clear plastic, made a vent from a window on one end, closed the garage door on a 20" box fan on the other and closed off the rest of the door with some plywood. System worked real good as far as I'm concerned. Of course I did it in the summer up here in Mn. I did try to roll some poly fibre on a patch with a foam roller once, it didn't come out all that great. The cemicals in the poly fibre don't like the foam rollers. Good thing it was on the bottom of the plane. Take care, Jim Chuk
Avid MK IV (flying)
Kitfox 4 (building)
Northern Mn
Well my be a power sander will be a little aggressive on tha hard edge and ribs, i think the stitching won't love it, I don't know the saying in english but ...(Patience et longeur, valent mieux que force et rage.)
http://www.youtube.com/user/stewarts.../0/-a1esnxDXyw
Eric
Thanks for all the help guys !!!!
Roger
Are you sure you can send it out for a professional paint job?
None of the pro's I'm aware of use Stewarts, and I'd be concerned about a standard Polyurethane like Imron or Jetglo sticking to the latex-based primer.
I just assumed I was going to have to paint it myself.
A buddy of mine restores Super Cubs, he uses Stewart Systems except for the paint.For paint he uses Martin/Senior Prism Urethane,his personal 2 Cubs have had it on for over ten years and it still looks great. The way he explained it to me is the water is just a carrier and you can put Urethane over it without any problems.I put some of Stewarts filler on a sample piece of fabric and even sprayed carb cleaner on it and it wouldnt touch it. Super good stuff.
Jon you're right, mixing products is always suspect, however one thing, Stewart's is not Latex-based, it's waterborne urethane, so once it's mixed and set it's as good as the solvent stuff (maybe even better in some cases). Much different than Latex based paints that will get soft and lift up after application.